The HR1018 is the answer to harmonics. Built to exceed the requirements of IEEE-519, the HR1018 is an 18 pulse VFD package which is available with optional three (3) contactor bypass configuration. The HR1018 includes the powerful GP10 - Vector AC Drive with an integrally mounted 18 pulse transformer providing exceptional efficiency and low harmonic distortion. Pre-packaged in a single NEMA 1,NEMA 12 or NEMA 3R enclosure, the HR1018 offers low installation and commissioning cost with minimal wall / floor space in power sizes to 800 Horsepower
HR1018 Features
- GP10 Vector AC Drive
- NEMA 1, 12, 3R Construction
- Integrally Mounted 18 Pulse Auto-Transformer
- Compliance with IEEE-519
- Enhanced Keypad :
- LED Display
- LCD Display
- Copy / Paste
- 50 Degree C Ambient
- Built in PID
- Soft-Switching Technology
- MODBUS RTU (standard)
- Advanced Auto Tuning
- Energy Savings
Drive Rating
- 208 Volts, 40 HP to 150 HP (VT), 3 Phase
- 230 Volts, 40 HP to 150 HP (VT), 3 Phase
- 460 Volts, 40 HP to 800 HP (VT), 3 Phase
HR1018 Input Disconnect Options
- Door Interlocked Input Circuit Breaker
- Door Interlocked Non Fused Disconnect
- Door Interlocked Fused Disconnect
- Input Fuses
- Door Interlocked Input Circuit Breaker & Input Fuse
HR1018 Panel Option
- Serial Communication
- Hand/Off/Auto with Speed Potentiometer.
- 3% or 5% Input and Output Reactors
- EMI / RFI Filters
- Duplex Motor Control
- Soft Start Bypass
HR1018 Serial Communication
As Information Technology and the Internet continue to revolutionize the way we all do business, it's important to have the ability to share information both up (to the building level) and down (to the VFD level), as well as horizontally to the other intelligent equipment in the building. The HVAC and industry is no exception. Saftronics GP10 Vector AC Drives support the following popular communication protocols
Modbus RTU (Standard)
MODBUS® Protocol is a messaging structure developed by Modicon in 1979, used to establish master-slave/client-server communication between intelligent devices. It is a de facto standard, truly open and the most widely used network protocol in the industrial manufacturing environment. Modbus is the standard on board protocol used by Saftronics Saflink Software Packages. No option board is required for Modbus communication
Metasys (Manual)
Johnson Controls - Metasys®, also known as Metasys/ N2 or simply N2. The Metasys Open Communications Protocols provides a connectivity conduit to more than 1000 individual devices for monitoring and control of vital building functions including Saftronics GP10 Vector AC Drives. Metasys Communication requires the installation of Saftronics option board P/N SOPCG11SMN2.
LonWorks (Manual)
Echelon device networking technology - Lon Works® enables end-users to remotely connect, monitor, control, sense, and diagnose intelligent devices including Saftronics GP10 Vector AC Drives. LonWorks Communication requires the installation of Saftronics option board P/N SOPCG11SLON.
Siemens (Manual)
Siemens® FLN P1 is a fieldbus system from the Siemens, Landis & Staefa Division. FLN P1 is mainly a fieldbus for the building and automation industry. more. Siemens Communication requires the installation of Saftronics option board P/N SOPCG11SP1.
Available Communication Options
- DeviceNet
- Profibus DP
- Interbus-S
- Lonworks
- Siemens P1 (Landis and Staefa)
- Metasys N2 (Johnson Controls)
- CAN Bus
- Genius
- MODBUS Plus
- Ethernet TCP/IP, Ethernet IP
More Information
Software
|
